Safety Modules Owner manual

Rockwell Automation Publication 1791ES-UM001D-EN-P - May 2013 35
Install and Connect Your Modules Chapter 3
Use DIN rail that is 35 mm (1.38 in.) wide to install the module in the control
panel. See the figure that shows required spacing.
Figure 14 - Required Spacing
Connect the Ethernet Cable
See the Ethernet Design Considerations Reference Manual, publication
ENET-RM002
, for information about Ethernet cable.
Set Network (IP) Address
The module ships with the rotary switches set to 999 and DHCP enabled.
Wiring Duct
15 mm (0.6 in.) Min
35 mm (1.38 in.) DIN Rail
Use horizontal or
vertical mounting.
End Plate
Wiring Duct
15 mm (0.6 in.) Min
44407
End Plate