Safety Modules Owner manual

34 Rockwell Automation Publication 1791ES-UM001D-EN-P - May 2013
Chapter 3 Install and Connect Your Modules
Install the Module
IMPORTANT
Follow these instructions when installing a module.
• Use the module in an environment that is within the general
specifications.
• Use the module in an enclosure rated IP54 (IEC60529) or higher.
• Use DIN rail that is 35 mm (1.38 in.) wide to mount the module in
the control panel.
• Always use an end plate on each end of the module to secure it.
• Place other heat sources an appropriate distance away from the
module to maintain ambient temperatures around the module
below specified maximums.
• A 1791ES module can be installed either horizontally or vertically.