Installation Instructions Manual

12 SoftLogix 5800 Controller
Rockwell Automation Publication 1789-IN001K-EN-P - December 2012
BAT
(1)
Off Normal operation.
Amber flashing The controller is in Power-up mode.
Red Persistent storage for the controller has failed.
OK Red flashing Recoverable fault.
Red Nonrecoverable fault.
Do the following to correct:
1. Remove the controller from the virtual chassis and then reinstall the
controller.
2. Download the project.
3. Place the controller in Run mode.
If the problem continues to occur, contact your Rockwell Automation sales
representative or local Allen-Bradley distributor.
Green The controller is OK.
(1) Note that these status indicators function slightly different than the same status indicators on a ControlLogix® controller.
Table 1 - Troubleshooting the Controller (continued)
Indicator Status Description