Installation Instructions Manual

8 ControlNet Daughtercard
Publication 1788-IN005A-EN-P - March 2001
ÿþýüûúùøù÷÷ùöõôóòññùóðúùïòûî
Connect the Card to the Network
After you have installed the card, you can connect it to the network. You must
connect the card to the network using an approved ControlNet fiber cable such as
one listed below:
• 1786-FS10 (10m cable assembly)
• 1786-FS20 (20m cable assembly)
• 1786-FS60 (60m cable assembly)
• 1786-FS100 (100m cable assembly)
• 1786-FS200 (200m cable assembly)
• 1786-FS300 (300m cable assembly)
For more fiber cable options, refer to the ControlNet Fiber Media Planning and
Installation Guide, publication CNET-IN001A-EN-P.
42822
42823