Installation Instructions

ControlNet Daughtercards 7

Publication 1788-IN005B-EN-P - October 2005

Set the node address to a value between 1 and 99. For optimum throughput, assign addresses

to your ControlNet nodes in a sequential order starting with 01.

Node address 00 is not a valid ControlNet address. You should only use node address 00 if

the product that uses the ControlNet daughtercard has the ability to set the node address

using the host device interface.

This feature is typically used on products that do not provide easy customer access to the

node address switches. If you set the node address switch to 00, it lets the host in which the

daughtercard resides set the node address, rather than letting the daughtercard read the node

address from the switch settings.

I/O

Status

LED

NAP

Node Address

Switches

Network Status Indicators (A and B)

Channel A Connector

Channel B Connector

1788-CNFR

Module

Status LED

31155

1788-CNF

10’s 0’s