Installation Instructions

ControlNet Daughtercards 17
Publication 1788-IN005B-EN-P - October 2005
Specifications
Operational Temperature IEC 60068-2-1 (Test Ad, Operating Cold),
IEC 60068-2-2 (Test Bd, Operating Dry Heat),
IEC 60068-2-14 (Test Nb, Operating Thermal Shock):
This product is suitable for application in equipment that is rated 0...60 °C
(32...140 °F) max. It is accebtable for the ambient slot temperature immediately
surrounding this product to reach 85 °C (185 °F) max
Storage Temperature IEC 60068-2-1 (Test Ab, Un-packaged Non-operating Cold),
IEC 60068-2-2 (Test Bb, Un-packaged Non-operating Dry Heat),
IEC 60068-2-14 (Test Na, Un-packaged Non-operating Thermal Shock):
-40...85 °C (-40...185 °F)
Relative Humidity IEC 60068-2-30 (Test Db, Un-packaged Non-operating Damp Heat):
5...95% non-condensing
Vibration IEC 60068-2-6 (Test Fc, Operating):
5 g @ 10...500 Hz
Operating Shock IEC 60068-2-27 (Test Ea, Unpackaged Shock):
30 g
Non-Operating Shock IEC 60068-2-27 (Test Ea, Unpackaged Shock):
50 g
Emissions CISPR 11:
Group 1, Class A (with appropriate enclosure)
ESD Immunity IEC 61000-4-2:
6 kV contact discharges
8 kV air discharges
Radiated RF Immunity IEC 61000-4-3:
10 V/m with 1 kHz sine-wave 80%AM from 30...1000 MHz
10 V/m with 200 Hz 50% Pulse 100%AM at 900 Mhz
Enclosure Type Rating None (open-style)
Power Requirements
(1)
1788-CNF
1788-CNFR
(1)
Note: To comply with UL and CSA restrictions, this equipment must be powered from a source compliant with the following:
Class 2 or Limited Voltage/Current, as defined in UL 508 Seventeenth Edition Section 32; and Safety-Extra Low Voltage
(SELV) as defined in CSA C22.1 no. 1010 Annex H
5V dc @ 440 mA max
5V dc @ 450 mA max
Power Consumption
1788-CNF
1788-CNFR
2.20 W
2.25 W
Power Dissipation
1788-CNF
1788-CNFR
2.20 W or 7.51 BTU/hr
2.25 W or 7.68 BTU/hr
Weight 0.1 kg (0.2 lb)
Wiring Category
(2)
(2)
Use this Conductor Category information for planning conductor routing. Refer to Publication 1770-4.1, "Industrial
Automation Wiring and Grounding Guidelines".
3 - on NAP