User Manual User Manual

Publication DNET-UM003A-EN-P - August 2000
Construct Your Starter Kit 2-27
8. Wire the 90° micro male to conductor cable to the PLUG10R and
insert into the 1784-PCIDS card.
9. Connect the 90
° micro male end of the cable to a KwikLink tap.
Your 1784-PCIDS scanner is now connected to your network.
Install RSNetWorx for
DeviceNet and RSLinx
RSNetWorx for DeviceNet software configures parameters of
DeviceNet devices from multiple vendors and helps you troubleshoot
the network and performs network diagnostics. This demo version of
RSNetWorx for DeviceNet
 only allows you to commission up to
seven nodes on your network. Refer to Chapter 3 for more
information on the node commission limits.
Follow these instructions:
1. Start Windows, if it does not start automatically.
We recommend that you quit all Windows application programs
before you install RSNetWorx for DeviceNet. If Autorun is
pin number: wire color: abbreviation: description:
1 black V- 24V dc power return
2 blue CAN_L data low - data line
3 bare DRAIN shield
4 white CAN_H data high - data line
5 red V+ +24V dc
42120