User Manual User Manual

1 Publication DNET-UM003A-EN-P - August 2000

Chapter

Construct Your Starter Kit

What This Chapter Contains

Read this chapter to construct your Starter Kit, connect the scanner

and interface, install software, and properly ground the network

before setting up an online connection with your PC. The following

table describes what this chapter contains and where to find specific

information.

What Your Network Will

Look Like

Refer to the illustrations below when you connect the devices your

DeviceNet network.

To: See page:

identify what your network will look like 2-1

assemble the KwikLink media system 2-4

install the ArmorBlock MaXum I/O 2-9

connect your power supply 2-14

ground your network 2-15

set up the 1771-SDN for SKITs 3 and 4 2-15

connect the 1770-KFD for SKITs 1, 3, and 5 2-17

install the 1784-PCD for SKITs 2, 4, and 6 2-19

set up the 1784-PCIDS for SKIT7 2-23

install the

DEMO

version of RSNetWorx 2-27