Installation Guide Manual

Rockwell Automation Publication CNET-IN001C-EN-P - October 2011 69
Install Your Fiber Repeater Modules and Repeater Adapters Appendix A
5. Connect the repeater adapter module to the ControlNet network by
connecting the drop line of the coax tap to the BNC connector.
6. Terminate any unused coax ports by connecting a 75 Ω terminator to the
unused BNC connector.
One 75 Ω terminator is shipped with the repeater adapter module.
Troubleshoot the Module
Use the channel 1 or channel 2 status indicators to check module status and
troubleshoot the module.
For status indicator descriptions, see page 73
.
31459-M
BNC Connector