Installation Guide User Manual

Publication CNET-IN002B-EN-P - June 2010 47
Install a ControlNet Coax Media System Chapter 3
3. Mount the tap and bracket assembly to:
• a DIN rail. Use the universal mounting bracket on specified
Allen-Bradley mounting rails, as shown in the illustration on the left.
This illustration also shows the optional transition plate.
• other mounting surface. Use four screws to attach the universal
mounting bracket to another mounting surface, as shown in the
illustration to the right. This illustration also shows the optional
transition plate.
31643-M 44993
Rail Type Cat. No.
A-B rail 1492-N1, 1492-N22, 1492-N44
DIN rail #3 1492-DR1, 1492-DR5, 1492-DR6, 1492-DR7