Installation Instructions Instruction Manual

14 ControlNet Modular Repeater Adapter
Rockwell Automation Publication 1786-IN013F-EN-P - April 2011
Tighten the screws to 0.6…0.8 N•m (5…7 in•lb).
3. Attach the V
in
- wire to one of the V
in
- terminals on the RTB.
Tighten the screws to 0.6…0.8 N•m (5…7 in•lb).
4. Install the RTB onto the repeater adapter module.
Tighten the screws to 0.6…0.8 N•m (5…7 in•lb).
TIP
The unused V
in
+ and V
in
- terminals can be used to supply power
to other devices.
V
in
+ and V
in
-
terminals
31456-M