Specifications

Specifications and Selection Criteria 45
1785-SO036C-EN-P - April 2002
Selecting the PLC-5 controller
Based on the number of I/O points required and the communication
options, select the PLC-5 controller. Use the charts that start on page
36.
Record your PLC-5 controller choice here:
Selecting controller options
Based on the controller options that are available, select which you
need for your system. See the information that starts on page 34.
Selecting the chassis
Based on the total number of modules, select a chassis. See the chart
on page 21.
Spec & Select
Total number of
I/O points:
Total number of
racks:
Total number of
chassis:
Need a serial
port?
Need an
Ethernet port?
Need a
ControlNet port?
Category: Selection:
PLC-5 controller
Backplane current load
If you need: List the catalog number:
backup controller memory (EEPROM)
backup support
Module type: Number selected:
communication modules
I/O modules
PLC-5 controller 1 maximum
PLC-5 hot backup module 1 maximum
slot-based power supply 1 maximum
total slots required:
catalog number of chassis: