Product data

Publication 1785-SG001B-EN-P - June 2006
Select Software 47
RSLogix Emulate 5
Software
RSLogix Emulate 5 software (9324-RL5350END) is the emulation package for
the PLC-5 programmable controllers. RSLogix Emulate 5 software used in
conjunction with RSLogix 5 software lets you run and debug your application
code while at your computer. In addition, RSLogix Emulate 5 software also
lets you test HMI screens, developed in RSView32 for example, without the
need to connect to a real controller.
By using RSLogix Emulate 5 software, you can eliminate the cost for dedicated
test ware, improve your productivity, and reduce the time to market of your
products.
RSLogix Emulate 5 software gives you enhanced debug capabilities. You can
set tracepoint and breakpoint instructions, ladder diagram only, in your
application code, use traces, and also vary the execution speed of the emulator.
RSLogix Emulate 5 software supports all the programming languages, ladder
diagram, function block diagram, structured text, and sequential function
chart. RSLogix Emulate 5 software does not allow control of real I/O.
RSLogix Emulate 5 System Requirements
Description Value
Personal computer IBM-compatible Intel Pentium II 300 MHz or Celeron 300A
(Pentium III 600 MHz recommended)
Software requirements Supported:
• Microsoft Windows XP with Service Pack 1 or later
• Microsoft Windows 2000 with Service Pack 2 or later
• Microsoft Windows NT version 4.0 with Service Pack 6A or later
RAM 128 MB min
Hard disk space 50 MB
Video requirements 16-color VGA graphics display, 800 x 600 or greater resolution