User manual

Index
I–4
K
keyswitch, location of, PLC5/10, 5/12,
5/15, 5/25 processors, 52
L
ladder programming
preparing programs for your application,
63
creating the program, 65
packaging example, 64
recover from rack fault, 84
logic scan. See program scan
logical address, 69
M
master/expander I/O modules, 23
MCPs, main program for PLC5/10, 5/12,
5/15, 5/25 processors, 63
mounting, I/O chassis dimensions, 36
N
noise protection, 35
O
operator interface
ControlView, 26
Dataliner, 28
PanelView, 26
programming terminals, 28
RediPANEL, 28
selection guidelines, 27
optimizing your system, 101
P
PanelView
features, 27
selection guidelines, 27
PII
program flow, 71
when to use, 71
PLC5 processors
backup memory modules, 213
backup system hardware selection, 214
battery replacement, 213
catalog numbers, 29
configure communications, PLC5/10,
5/12, 5/15, 5/25 processors, 53
data transfer, 81
environment. See environment
protecting with an enclosure, 34
selection chart, 29
switch settings
SW1PLC5/10, 5/12, 5/15, 5/25
processors, for DH+ and
adapter/scanner mode, A7
SW2PLC5/10, 5/12, 5/15, 5/25
processors
for adaptermode processor in
PLC5 system, A8
for adaptermode processor in
PLC2/20 system, A9
for adaptermode processor in
PLC5/250 system
4word groups, A11
8word groups, A10
for adaptermode processor in
PLC2/30 system, A9
for adaptermode processor in
PLC3 system
4word groups, A11
8word groups, A10
for adaptermode processor in
scannermode system, A8
for adaptermode processor in sub
I/O scannermodule system,
A9
for adaptermode processor in VME
system, A8
terminate remote I/O link, SW3 for
PLC5/10, 5/12, 5/15, 5/25
processors, A12
PLC5 processors
applications programs, 63
creating programs, 65
backup system, 17
catalog numbers, 15
centralized control system, 12
common features, 16
data table
addressing formats, 69
file structure and size, 68
distributed control system, 12
features, 16
preparing programs, packaging example,
64
processor status file, 69
remote I/O adapter mode, 19
remote I/O scanner mode, 18
power supplies
chassis switch settings, A3
mounting dimensions, 37
selection, 29212
powerup protection, 710