QUICK START CLASSIC PLC-5 PROG Instruction Manual

Chapter 1
Publication 178510.3 - October 1996
Overview
This quick start is designed to provide you with the information you
need to get your system up and running quickly. Use this document if
you are knowledgeable about Classic PLC-5 products, but may not
have used one or more of them recently. The information we provide
is geared to “jog your memory.”
Set up the hardware
(Chapter 2)
Set up the software
(Chapter 3)
PC with programming
software installed
terminal
cable
PLC5/25
Troubleshoot the
Processor System
(Chapter 4)
Product name: Catalog number:
Hardware
Classic PLC5 processor with
2 keys
1785LT4, LT3, LT2, LT
Lithium Battery
(in a clear bag)
1770XY
I/O chassis
1771A1B, A2B, A3B1, A4B (panel mount)
1771A3B (rack or panel mount)
Memory modules
1785MJ
1785MK (PLC5/25 only)
Power supply 1771P1, P2 P3, P4, P4S, P4S1, P4R, P5, P6S,
P6S1, P6R, P7, PS7
Programming System
PC
Check your programming software documentation for
system requirements, such as memory, etc.
PLC5 programming software
Choose a programming software package that is
compatible with Classic PLC5 processors.
communication module DH+ interface and interconnect cable
Important: In this manual, we assume you are using a brand-new
Classic PLC-5 processor out of the box.
What You Need to Do
Components You Need