QUICK START CLASSIC PLC-5 PROG Instruction Manual
2–6 Set up the Hardware
Publication
178510.3 - October 1996
Install the I/O Modules
Locking
Bar
Card Guides
20618-M
Install
each I/O module and connect
the wiring arm.
For more information, see the installation instructions or user manual
for the particular module you are installing.
Connect
the industrial terminal end of the
CP cable to the communication card.
1
2
Connect the CP cable to the connector on
the PLC5 processor
.
Connect the Programming
Terminal and the PLC5
Processor to the
Communication Card
For more information, see:
• Classic PLC-5 Programmable Controllers Hardware Installation
Manual, publication number 1785-6.6.1
• 1784-KTx Communication Interface Card User Manual,
publication number 1784-6.5.22
• Data Highway/Data Highway Plus/Data Highway II/Data
Highway 485 Cable Installation Manual, publication 1770-6.2.2
More
More