QUICK START CONTROLNET PLC-5
Connect the Personal
Computer to the
PLC-5 Processor
2–6 Set Up the Hardware
Publication
1785-10.7 – October 1997
Powerup the System
Powerup the system. Check the LED display on the processor. If
your system is operating properly, the PROC LED should be steady
red. If the PROC LED is not red, see chapter 4 for troubleshooting
information before you install any I/O modules.
Install the I/O Modules
Locking
Bar
Card Guides
20618–M
Install
each I/O module and connect
the wiring arm.
For more information, see the installation instructions or user manual
for the particular module you are installing.
For more information, see:
• ControlNet PLC-5 Programmable Controllers User Manual,
publication number 1785-6.5.14
• the documentation provided with your communication card
• Data Highway/Data Highway Plus/Data Highway II/Data
Highway 485 Cable Installation Manual, publication 1770-6.2.2
More
More