QUICK START CONTROLNET PLC-5

2–4 Set Up the Hardware
Publication
1785-10.7 – October 1997
Install the Power Supply
20619–M
Set
the jumpers on
the back side of the
power supply like this:
Connect the power cord to the 120V ac
connector of the power supply module.
Install the power supply in the chassis
and snap the module-locking bar over
the modules.
This
side plugs into connector on the module.
insert wire
here
place tool here
insert wire
here
place tool here
or
1
2
3
locking bar
For more information, see the Power Supply Modules
(1771-P4S, -P6S, -P4S1, -P6S1) Installation Instructions, publication
number 1771-2.135.
More