User Manual Owner manual

Index
I–3
scheduled discrete I/O data transfer, 21
scheduled operations
discrete I/O data transfer, 22
nondiscrete I/O data transfer, 22
peertopeer communication, 22
understanding, 21
unscheduled datatransfer operations,
23
unscheduled nondiscrete I/O data
transfer, 23
unscheduled operations
ControlNet I/O Transfer (CIO)
instruction, description, C1
ControlNet I/O Transfer (CIO)
instructions
description, 24
features, 24
I/O transfer instructions, programming,
44
immediate data I/O instructions,
programming, 46
ladderrung messages, 23
messaging from programming devices,
23
nondiscrete I/O data transfer,
description, 24
nondiscrete I/O data transfers
description, C1
features, 24, C1
peertopeer messaging instructions,
programming, 42, C1
peertopeer messaging, 23
description, 24
features, 24
ControlNet I/O automatic mapping, 27
ControlNet I/O mapping
automatic, 27
reserving rack space for remoteI/O
linked racks before mapping, 27
understanding, 27
discrete I/O datatransfer mapping,
210
mapping data transfers, 29
nondiscrete I/O datatransfer
mapping, 210
modules that may be
accommodated, 212
ControlNet I/O status indicator, 14, 15
ControlNet I/O Transfer (CIO) instructions,
23, 24, C1
ControlNet immediate data I/O
instructions
Immediate Data Input (IDI), 26, C2
Immediate Data Output (IDO), 26,
C2
process, C2
ControlNet immediate data I/O instructions,
process, 26
ControlNet Immediate Data Input (IDI)
instruction, 26
ControlNet Immediate Data Output (IDO)
instruction, 26
ControlNet network
definition of, ii
locating additional information, iv
ControlNet Network Access Port (NAP),
14, 15
ControlNet PLC5/20C processor,
identifying components of, 14
ControlNet PLC5/40C processor,
identifying components of, 15
ControlNet processor
configuring your ControlNet system, 31
fault codes, B4
installing, 11
planning to use, 21
programming your system, 41
ControlNet system
cabling, 119
configuring, 31
automatically adding nodes to the
node list, 35
automatically mapping modules and
messages that are not mapped,
38
changing a 1794 I/O module's fault
action, 24, 310, 44
changing a 1794 I/O module's fault
action from idle, 311
changing a 1794 I/O module's idle
action, 24, 311, 44
changing a 1794 system's fault action,
310
changing a 1794 system's fault action
from idle, 310
changing a 1794 system's idle action,
310
changing a module or message's type,
37
changing a node's series or revision,
35
changing a node's status, 35
changing a node's type, 35
changing the Expected Network
Packet Time (ENPT) for a module
or message, 37
clearing information about a module or
message, 38
clearing information about all modules
and messages, 38