User Manual Owner manual

Chapter

1-1

Installing Your ControlNet PLC5 Processor

If you want to read about: Go to page:

Completing the preliminary setup

12

Checking the contents of the processor package 12

Handling the processor 13

Identifying the processor channels/connectors 14

Setting the I/O chassis backplane switches 16

Setting the I/O chassis configuration plug 17

Installing keying bands for the processor 17

Installing and disposing of the processor battery 18

Selecting the Data Highway Plust (DH+t) station address of Channel 1A

110

Specifying the serial interface for Channel 0 111

Selecting the ControlNet network address of Channel 2 111

Inserting/removing the processor into/from the I/O chassis 112

Installing a remote I/O link 112

Installing a DH+ link 114

Connecting to a ControlNet network 115

Connecting a programming terminal 116

Selecting appropriate cables 118

For detailed information on installing chassis and adapters, see the

Enhanced and Ethernet PLC-5 Programmable Controllers User Manual,

publication 1785-6.5.12.

Using This Chapter