User Manual Owner manual

Chapter 5
Monitoring and Troubleshooting Your
ControlNet System
5-3
The ControlNet status indicators inform you of the operational state of the
ControlNet network.
Indicator State Description Probable Cause(s) Recommended Action(s)
Off
ControlNet I/O not present
or not operating
Normal operation if Channel
2 not being used
None
Steady
Green
All nodes configured in
the ControlNet map table
present and operating
properly
Normal operation None
I/O
At least one node
configured for the
Cable(s) or connector(s)
broken or not connected
Repair or replace cable(s) or
connector(s), and reconnect
I/O
Flashing
Green/Off
con
fi
gure
d
f
or
th
e
ControlNet network not
present or not operating
properly
Destination module(s) bad
or missing
Repair or replace module(s)
properly
Node(s) not on network Connect node to network
Flashing
Red/Off
All nodes configured for
ControlNet not present or
Cable(s) or connector(s)
broken or not connected
Repair or replace cable(s) or
connector(s), and reconnect
Red/Off
ControlNet
not
present
or
not operating properly
Nodes not on network Connect nodes to network
Using the ControlNet Status
Indicators
I/O
AB