User Manual Owner manual

Chapter 3
Configuring Your ControlNet System
3-9
Do this:If you want to:
insert an entry or range of entries into the list
1. Move the cursor to the node where you want to add a module or message
2. Press
[F7]—Insert to List
3. Type the slot or message number (slot/message or node.slot/message) for a single new
entry or range (slot/messageslot/message or node.slot/messageslot/message
) for
multiple new entries
4. Press
[Enter]
delete a module or message 1. Move the cursor to the item that you want to delete
2. Press
[F8]—Delete *
3. Press [F8]—Delete Item
delete all modules and messages 1. Press [F8]—Delete *
2. Press [F10]—Delete List
go to the ControlNet I/O Action screen
Important: This option is not available if the
display mode is set to
Message Display
on this screen by using [F3]—Select
Display
.
1. Move the cursor to the 1794 Flex I/O module entry who's actions you want to edit
2. Press
[F9]—Edit Actions
apply pending edits and return to the
ControlNet I/O Mapping (Monitor) screen
Press [F1]—Accept Edits
return to the ControlNet I/O Mapping
(Monitor) screen without saving any
pending edits
Press [Esc]