User Manual Owner manual

Chapter 1
Installing Your ControlNet PLC5 Processor
1-20
The following ControlNet cable system components are available from the
Allen-Bradley Company, Inc.:
Item
①
Cat. No.
ControlNet Coax Tool Kit 1786CTK
Rightangle Ttap 1786TPR
Coax Tap Kit
Straight Ttap 1786TPS
C
oax
T
ap
Ki
t
Rightangle Ytap 1786TPYR
Straight Ytap 1786TPYS
Repeaters
Highvoltage ac & dc 1786RPT
R
epeaters
Lowvoltage dc 1786RPTD
RG6 Quad Shield Cable StandardPVC CMCL2 1786RG6
ControlNet Network Access Cable3.05 m (10 ft) 1786CP
Barrel (plug to plug) 1786BNCP
BNC/RG6 plug 1786BNC
BNC Connectors
Bullet (jack to jack)
1786BNCJ
Isolatedbulkhead (jack to jack) 1786BNCJI
Terminators (BNC75Ω)
1786XT
①
For a complete list of ControlNet cable system components that are
available from AllenBradley Company, Inc. and other sources, see
the ControlNet Cable System Component List, publication AG2.2.
Important: Install all wiring for your ControlNet system in accordance
with the regulations contained in the National Electric Code (or applicable
country codes), state codes, and applicable municipal codes.
For detailed information on ControlNet cabling, see the following:
Publication Publication Number
ControlNet Cable System Component List
AG2.2
ControlNet Cable System Planning and Installation Manual 17866.2.1
ControlNet Coax Tap Installation Instructions 17862.3
ControlNet Network Access Cable Installation Instructions 17862.6
ControlNet Repeater Installation Instructions 17862.7
Industrial Automation Wiring and Grounding Guidelines 17704.1
More