User Manual Owner manual
Index
I–8
number of maptable entries required,
210
nonredundant media, 115
NUI. See Network Update Interval
NUT. See Network Update Time
O
owner, definition of, ii
P
Peer In, 212
Peer Out, 212
planning to use your processor, where to
go, 21
PLC5 processors, locating additional
information, iii
PLC5 programming software, locating
additional information, iii
processor
connecting DH+ link, 114
front panel
PLC5/20C, 14
PLC5/40C, 15
specifications
backplane current load
maximum, A2
typical, A2
battery, A1
certification, A1
clock/calendar, A1
communication, A1
ControlNet I/O
maximum link cable length with
repeaters, A2
maximum link cable length without a
repeater, A2
maximum nondiscrete I/O
datatransfer datatable size,
A2
maximum number of nodes per link
with repeaters, A2
maximum number of nodes per link
without a repeater, A2
maximum number of repeaters in
series per link, A2
maximum number of segments in
series per link, A2
Network Update Time (NUT), A2
number of ControlNet ports, A2
number of redundant media
ControlNet ports, A2
transmission rate, A2
environmental conditions, A1
hardware addressing, A1
heat dissipation, A1
I/O modules, A1
keying, A1
location, A1
maximum number of MCPs, A2
maximum total I/O
any mix, A2
complimentary, A2
maximum user memory words, A2
memory modules, A1
nonControlNet remote I/O
I/O scan time, A2
maximum number of devices, A2
maximum number of ports
configurable for DH+ or remote
I/O, A2
maximum number of racks, A2
number of dedicated DH+ ports,
A2
transmission rate, A2
number of coprocessor ports, A2
number of serial ports, A2
program scan time, A2
shock and vibration, A1
weight, A1
processor RUN/FAULT status indicator,
14, 15
processor status file, B1
layout, B1
processorresident local I/O, reserving
space for, 27
programming a processor, through Channel
0, 116
programming terminal, connecting, 116
programming your ControlNet system,
where to go, 41
R
redundant media, 115
definition of, ii
remote I/O
cable lengths, 112
nonControlNet, reserving space for, 28
remoteI/O link, 215
remoteI/O immediate I/O transfers, 25,
47
repeater, definition of, ii
replacing a nonControlNet remote I/O
network with a ControlNet network,
215
changing blocktransfer instructions,
216