User Manual Owner manual

Chapter 1
Installing Your ControlNet PLC5 Processor
1-2
Before installing your ControlNet PLC-5 processor:
1. Complete the following:
determine the proper environment
configure the proper grounding
route the conductors properly
For detailed information on completing these tasks, see the
Enhanced and Ethernet PLC-5 Programmable Controllers
User Manual, publication 1785-6.5.12.
2. Check your processor package, and make sure that you have
the following:
Processor
ControlNet PLC5
R
Programmable Controller,
1785L20C or L40C
1 Lithium Battery, 1770XYC
1 DIN connector cover
Contents of Tray
1 DIN
connector
cover
4 Terminating resistors150W
➀
2 or 4
➁
Terminating resistors82W
③
y
g
2 or 4
➁
3pin connectors
2 Keys
y
1 Battery cover with screw
1 1784CP7 cable adapter for 1784CP, CP5 cables
ControlNet PLC5 Programmable Controllers User Manual,
p
ublication 17856.5.14
Documentation
publication
1785

6
.
5
.
14
ControlNet PLC5 Programmable Controllers Release Notes,
publication 1785

6514

RN1
pu
bli
ca
ti
on
1785

6
.
5
.
14

RN1
CSA Hazardous Location Approval Supplemental Information,
publication AG

41
publication AG4.1
Enhanced and Ethernet PLC5 Programmable Controllers User
Manual publication 1785 6 5 12
Manual, publication 17856.5.12
Guidelines for Handling Lithium Batteries, publication AG5.4
Industrial Automation Wiring and Grounding Guidelines,
publication 17704.1
➀
Identified by four colored bands: brown, green, brown, and gold
➁
Two with a PLC5/20C processor, four with a PLC5/40C processor
③
Identified by four colored bands: gray, red, black, and gold
If any items are missing or incorrect, contact your local
Allen-Bradley Company, Inc. sales office or distributor.
Before Y ou Begin
More