User guide

Communicating through the 1785KA5
Communication Adapter Module
Chapter 3
3-12
Remote Read from a 500CPU
DH485 supports remote messaging. Below is the data entry screen for a
remote read.
Display Area:
Message:
Prompt:
Data/Cmd Entry:
Status:
Type:
Read/Write:
Target Device:
Channel:F10
Target Node:F1
Remote Bridge Link ID:F2
Remote Bridge Node Address:F3
Local Bridge Node Address:F4
Local/Remote:
Control Block:
Destination/Source File Address:F5
Target SRC/Dst File Address:F6
Message Length in Elements:F7
Message Timeout (seconds):F8
ERROR CODE:
Error Code Desc:
0 control bit address: N10 : 0/8
Peer-to-Peer
READ
500CPU
1
3
2
0
4
Remote
N10 : 0
N7 : 0
N7 : 50
5
20
ignore if timed out:
continuous run:
error:
message done:
message transmitting
message enabled
to be retried:
awaiting execution:
waiting for queue space:
TO
CO
ER
DN
ST
EN
NR
EW
WQ
0
0
0
0
0
0
0
0
0
Press a function key: <ENTER> to save and exit, or <ESC> to abort
offline no forces INSTR INSERT File 009
Main Functions:
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
TARGET
NODE
REMOTE
LINK ID
REMOTE
ADDRESS
LOCAL
ADDRESS
FILE
ADDRESS
TARGET
ADDRESS
MESSAGE
LIMIT
MESSAGE
TIMEOUT
TOGGLE
BIT CHANNEL