User guide

Publication 1785-5.21 - January 1999
Packing Data
PLC-5 Accessory Kit
(Cat. Nos. 1785-ACC5LA, -ACC5LB, -ACC5LT)
Purpose of this Packing Data Use this packing data to determine the contents of your PLC-5®
Accessory Kit.
What Each Accessory Kit
Contains
Each kit contains the various accessories available for your specific
PLC-5 processor, as shown in the following table:
If your kit does not contain any of these accessories, please contact
technical support at [phone].
This PLC-5 Accessory Kit: Contains these accessories: And applies to these PLC-5 Processors
Cat. No. 1785-ACC5LA
• Four 150ohm terminating resistors
• Four 82ohm terminating resistors
• One CP/CP5 to PLC-5 adapter
• Two serial channel terminal blocks
• One DIN cover
• One battery cover with label and captive screw
• Two keys
Enhanced PLC-5:
• PLC-5/11 - Cat. No. 1785L11B
• PLC-5/20 - Cat. No. 1785L20B
• PLC-5/26 - Cat. No. 1785L26B
• PLC-5/20E - Cat. No. 1785L20E
• PLC-5/20C - Cat. No. 1785L20C15
Cat. No. 1785-ACC5LB
• Eight 150ohm terminating resistors
• Eight 82ohm terminating resistors
• One CP/CP5 to PLC-5 adapter
• Four serial channel terminal blocks
• One DIN cover
• One battery cover with label and captive screw
• Two keys
Enhanced PLC-5:
• PLC-5/30 - Cat. No. 1785L30B
• PLC-5/40 - Cat. No. 1785L40B
• PLC-5/40L - Cat. No. 1785L40L
• PLC-5/40C - Cat. No. 1785L40C15
• PLC-5/40E - Cat. No. 1785L40E
• PLC-5/46 - Cat. No. 1785L46B
• PLC-5/60 - Cat. No. 1785L60B
• PLC-5/60L - Cat. No. 1785L60L
• PLC-5/80 - Cat. No. 1785L80B
• PLC-5/80C - Cat. No. 1785L80C15
• PLC-5/80E - Cat. No. 1785L80E
• PLC-5/86 - Cat. No. 1785L86B
Cat. No. 1785-ACC5LT
• One battery cover with label and captive screw
• Two serial channel terminal blocks
• Two keys
Classic PLC-5:
• PLC-5/10 - Cat. No. 1785LT4/A
• PLC-5/12 - Cat. No. 1785LT3/A
• PLC-5/15 - Cat. No. 1785LT/B
• PLC-5/25 - Cat. No. 1785LT2/A