Configuration Manual Owner's manual

Publication 1784-UM003A-EN-P – June 2003
354 Motion Object Attributes
DC Bus Voltage This parameter is the present voltage on the DC Bus of the drive.
Torque Limit Source This parameter displays the present source (if any) of any torque limiting for
the axis.
GSV/SSV Access Attribute Name Data Type Values
GSV DC Bus Voltage DINT Volts
GSV/SSV Access Attribute Name Data Type Values
GSV Torque Limit Source DINT 0 = Not Limited
1 = Neg.e Torque Limit
2 = Pos. Torque Limit
3 = Amp Peak Limit
4 = Amp I(t) Limit
5 = Bus Regulator Limit
6 = Bipolar Torque Limit
7 = Motor Peak Limit
8 = Motor I(t) Limit
9 = Voltage Limit