Configuration Manual Owner's manual

Publication 1784-UM003A-EN-P – June 2003
Configuring a 1394x-SJTxx-D Digital Servo Drive 201
Power Tab Use this tab to select a bus regulator for your 1394x-SJTxx-D drive module.
Figure 8.8 Module Properties - Power Tab
Bus Regulator ID
Select the catalog number that describes bus regulator device used by the
1394x-SJTxx-D drive module. Depending upon the Drive Module you have
selected, one or more of the following are available:
Bus Regulator ID Description
1394-SR10A 1400 Watt Resistor, for 5 and 10 kW modules
1394-SR9A 300 Watt External Shunt, No Fan, for 22 kW modules
1394-SR9AF 900 Watt External Shunt, No Fan, for 22 kW modules
1394-SR36A 1800 Watt External Shunt, No Fan, for 22 kW modules
1394-SR36AF 3600 Watt External Shunt, No Fan, for 22 kW modules
<none> No bus regulator
Internal The bus regulator is internal to the drive and need not be
specified
Custom A bus regulator not listed above