User Manual

7-4 Choose and Connect a PCMK Cable
Publication 1784-UM519C-EN-P - September 2006
2. Position the assembly on the computer so the narrow end of the wedge is
closest to the PCMCIA slot. When you find the best location for the wedge,
use a pencil to mark the location on the computer.
3. Separate the wedge from the electronics pod.
4. Remove the paper backing from the wedge.
ATTENTION
The adhesive on the wedge is very strong. Once you remove
the protective paper and attach the wedge to the computer,
you cannot remove the wedge. Be certain that you are
confident about the position of the wedge before you secure it.
Length of cable from connector to
electronics pod 17.8 cm (7.0 in.)
19875b
19950