User Manual

3-16 Install the RSIPCMK Driver for the Windows 95/98 Operating Systems
Publication 1784-UM519C-EN-P - September 2006
14. Click Properties. Verify that the socket controller is enabled in the hardware
profile you are using.
If Then
The Device status says “This
device is not present, not
working properly, or does not
have all drivers installed, code
10.”
Click the Resources tab and check the Conflicting Device list for
possible hardware conflicts,
Or you may want to try enabling the Use Automatic Settings
option. Refer to step
8.
The Automatic Settings option works only in Windows 95 or
Windows 98 upgrade configurations.
Or you have a general PCMCIA problem, and you should contact
your hardware supplier for a resolution.