User Manual

Publication 1784-UM519C-EN-P - September 2006
Chapter 3
Install the RSIPCMK Driver for the Windows
95/98 Operating Systems
What’s in This Chapter?
Refer to this chapter to perform the following:
The instructions in this chapter assume that you are using the Windows 95/98
operating systems.
The screens (dialogs) shown in this chapter are taken from the Windows 95/
B operating system. If you are using another version of the Windows 95 or
Windows 98 operating systems, your dialogs may be different.
Locate the RSIPCMK Windows 95/98 1784-PCMK Driver
There are two ways to obtain the 1784-PCMK driver. The driver is located:
• on the RSLinx software version 2.20.107 or later product CD, located in the
PnPDrivers folder.
• or visit http://support.rockwellautomation.com, then select Technical
Support.
Topic Page
Locate the RSIPCMK Windows 95/98 1784-PCMK
Driver
3-1
Install the Driver 3-3
Run the PCMKinfo Program 3-6
Stop the PCMCIA Card in the Windows 95 /98
Operating System
3-7
Remove and Unistall the RSIPCMK Plug and Play
Driver
3-7
Troubleshoot the Card 3-8