Installation Instructions Instruction Manual

Publication 1784-IN003D-EN-P - January 2006

Chapter

Install the Driver in Windows 98/Me

Install the Driver in Windows 98/Me for the First Time

Follow these steps to install the driver for the first time on a personal computer

running Windows 98/Me.

1. Shut down the computer.

2. Insert the 1784-PCIC or 1784-PCICS card into an unused PCI slot.

Refer to Chapter 1 for installation information.

3. Restart the computer.

After the computer restarts, the operating system detects the new PCI card

and displays the Add New Hardware wizard.

For Information On This Topic See Page

Install the Driver in Windows 98/Me for the First Time 4-1

Install the Virtual Backplane Driver 4-3

Update the Existing Driver in Windows 98/Me 4-5