User guide

Publication 1784-IN029C-EN-P - June 2001
Chapter 6
Install and Use the Driver for Windows 2000
What’s in This Chapter?
This Chapter describes how to:
In order to follow the instructions in this Chapter, you must:
• have Windows 2000 loaded
• have the Windows 2000 driver for the PCD card
• have RSLinx version 2.2 or later with RSLinx Service Pack 2 installed
For RSLinx versions later than 2.2, no Service Pack is required for the
1784-PCD card to work.
To: See page:
Install the Driver 6-2
Update the 1784-PCD Plug and Play Driver 6-7
Stop and Eject the 1784-PCD Card 6-8
Show the Card Unplug/Eject Icon on the
Taskbar
6-11
TIP
You can have two PCD cards installed to monitor different
networks or access different devices. If you install two PCD
cards, each card will have a unique serial number, as shown in
this excerpt from the RSLinx PCD Driver Configuration Screen.