Installation Instructions User guide

Publication 1784-IN034D-EN-P - June 2002

Chapter

Install and Use the 1784-PCC Card

in Windows 2000/XP

What is in This Chapter?

Read this chapter to learn how to operate the 1784-PCC card on Windows 2000/XP.

The following table describes what this chapter contains and where to find specific

information.

In order to follow the instructions in this chapter, you must:

• have Windows 2000/XP loaded

• have the Windows 2000/XP driver for the PCC card

Table 3.A

For information about this topic: See page:

Verify the RSLinx Version Number 3-2

Locate the 1784-PCC Windows 2000/XP Driver 3-2

Install the Driver 3-3

1784-PCC Hardware Properties 3-8

Stop and Eject the 1784-PCC Card 3-8

Remove the 1784-PCC Plug-and-Play Driver 3-11

Troubleshoot the Card Installation 3-13

Update the 1784-PCC Plug-and-Play Driver Version 1.0 to

Version 1.6 or Later

3-21

Show the Card Unplug/Eject Icon on the Taskbar 3-28

IMPORTANT

You can have one 1784-PCC card configured in Windows

2000/XP. If you insert more than one 1784-PCC card into your

PC, only one of the cards will be available for use.