User manual

Running Diagnostics A-11
1784-6.5.27 - September 1997
3. Use the decision table below for both protocols.
To Press this key
enable the PKT
x card on a DH+ or DH-485 link F4
disable the PKT
x card from a DH+ or DH-485 link
(disables the card from the network but protocol is not
removed from the card)
F5
display the PKT
x card on DH+ or DH-485 link F6
clear the memory location of the PKTx card:
• disables card from the DH+ or DH-485 link
• clears the DH+ or DH-485 protocol from the card
F7
return to the main menu F10