User manual

A-10 Running Diagnostics

1784-6.5.27 - September 1997

Test the Dual Port

1. From the main menu, press . This option allows you to test the

DH+ or DH-485 communications on a live network.

2. Use the decision table below.

Diagnostic Description If the test fails

Memory

Tests the PKT

card’s ability to read

from and write to its internal

memory chips

The PKT

card’s RAM may have a

problem

Timer Operation

Tests the accuracy and capabilities

of the counter-timer chips

PKT

card may not have reset

completely

• Turn power off to the computer.

• Remove the card and reinsert.

• Turn power on to the computer.

• Run this test again.

Serial Port

Operation

Tests the interrupts and loopback

capabilities of the serial I/O chip

There may be a hardware problem

with the PKT

card or The wrong

set of KTx*.BIN files are running

To load this

protocol to the

PKT

card

Press

this key

You see the message

DH+ (page A-17) F3 DH+ Loading Test. . . . LOADED

DH 485 (page A-17) F4 DH-485 Loading Test. . . . LOADED

return to the main

F10 N/A