User manual

A-6 Running Diagnostics

1784-6.5.27 - September 1997

Define a PKT

Card to Test

This option updates the KTXDIAG.INI file. If you have more than one

PKTx card installed or you are using a 1784-PKTXD card, you need to

define the Base Memory Address for each channel and the IRQ of the card

you want to test. Use the PKTXD utility to obtain this

information (page A-2).

1. From the main menu, press .

2. Change the configuration to match the base memory address (of one

channel), and the IRQ for the PKTx card that you want to test

To change the

Press this key until

you see the setting

that you need

channel’s memory address F4

interrupt F5

DH-485 baud F8