User manual

4-10 Connecting the Interface Card
1784-6.5.27 - September 1997
Connecting the Card to an Enhanced PLC-5 Processor
To connect the 1784-PKTX or -PKTXD card to an enhanced PLC-5
programmable controller, use a 1784-CP13 cable. Follow these steps:
1. Connect the 3-pin Phoenix end of the CP13 cable to the PKTx card.
2. Connect the adapter to the connector on the front of the enhanced
PLC-5 programmable controller.
1784-CP13 Cable
20757-M