User manual

3-4 Installing the Card Inside the Computer
1784-6.5.27 - September 1997
The Windows 95 and the 1784-PKT x Card
To use the PKTx card with Windows 95, you need an appropriate plug and
play driver. RSLinx contains the appropriate DH+/DH-485 driver for the
1784-PKTx card. Install RSLinx or a custom software driver before you
attempt to use the PKTx card. To verify that your PKTx card is using the
appropriate driver, use the Device Manager within Windows 95. If you do
not have the appropriate driver installed, the 1784-PKTx card will not
function properly.
If you have RSLinx installed on your computer, call Rockwell Software
Technical Support, at [phone], for information on locating the plug
and play driver for the 1784-PKTx card.
Reviewing the 1784-PKT x Settings in Windows 95
By using the Device Manager within Windows 95, you can review the
settings used to run the 1784-PKTx card without using the PKTx Utilities.
Follow the steps below to review the Device Manager settings.
1. Click on the My Computer icon with the right mouse button.
2. Select
Properties from the menu. The System Properties dialog box
appears.