User manual

2-4 Configuring the PKTx Hardware
1784-6.5.27 - September 1997
When looking directly at the 1784-PKTx card, the Base Memory Address
jumper looks like:
Establishing Multiple PKTx Cards
It is possible to have more than one PKTx card within your system.
However, you can only have up to four cards functioning at the same time.
There are two jumpers which can be set to establish unique identification
between the PKTx cards. The position and combination of the two jumpers
allow each card to be uniquely recognized by any application software.
32BIT
1MEG
32BIT
1MEG
This is a jumper that is not covered.
This is a jumper that has the 32bit
position for Windows 95 covered.
40022