User manual

2-2 Configuring the PKTx Hardware
1784-6.5.27 - September 1997
Figure 2-1 Overview of the jumpers on the PKT x card
Base Memory Address Restriction
Although the assignment of the IRQ and base memory address values is
automatic, and does not require user intervention, there is one jumper on
the PKTx card that is used to restrict the range of values that can be assigned
to the base memory address by the PCI BIOS. This jumper is called Base
Memory Address jumper, and it must be set before you install the PKTx
card inside your computer.
The PKTx Utilities diskette contains a program (PKTXD.EXE)
which allows you to view which base memory address was chosen
by the system. Refer to page A-2 for more information.
The Base Memory
Jumper (JP2)
Card ID Jumper
(JP3)
40021