User manual

Publication 1747-UM011F-EN-P - May 2007
98 Identifying the Components of Your Processor
REM Position
This position places the processor in the Remote mode: either the
REMote Run, REMote Program, or REMote Test mode. You can change
the processor mode by changing the keyswitch position or by
changing the mode from a programmer/operator interface device. You
can perform online program editing in this position.
To change the processor mode to REM, toggle the keyswitch from
RUN or PROG to REM. When the keyswitch is in the REM position,
you can use a programmer/operator interface device to change the
processor mode.