User manual

Publication CNET-UM001C-EN-P - November 2005
Produce and Consume Tags (Interlock Controllers) 5-15
Use RSNetWorx to Consume a Tag by a ControlNet Scanner
You must use the RSNetWorx Scanlist Configuration tool to configure a
ControlNet scanner to consume tags. In the example used for the following
steps, a 2711P-RN15S ControlNet Scanner module located in a PanelView
Plus terminal consumes a tag produced by a ControlLogix controller.
1. Open the RSNetWorx for ControlNet file for your project.
2. Go online.
3. Enable edits.
4. Access the Scanlist Configuration for the ControlNet Scanner.
A.Click Network.
B.Click Online.
Click Enable Edits.
A.Right-click on the
ControlNet scanner card.
B.Click Scanlist Configuration.