User manual

Publication CNET-UM001C-EN-P - November 2005
Configure a ControlNet Module 3-5
F. Inhibit the module, if necessary.
Initially, do you want
the module to
communicate with
the controller?
Then
Yes Leave the box
unchecked
No Check the
box
(1)
(1)
When you test this portion of the system,
clear the check box.
G.Determine if you want a major fault on the controller if
the connection to the local communication module fails
in Run Mode.
If You Want The
Controller To
Then
fault (major fault) Select the check box
continue operating Leave the check box
unchecked
(1)
(1)
Monitor the connection using ladder logic.
F. Click Finish.