User manual

Publication CNET-UM001C-EN-P - November 2005
1-12 About the Logix5000 ControlNet Communication Modules
This table lists the possible bridges between communication networks.
Table 1.3 Bridges Between Communication Networks
To Bridge
From This
Network
To This
Network:
You Can Use the Following
(1)
In a CompactLogix System In a ControlLogix Chassis In a FlexLogix Controller
ControlNet DeviceNet • 1769-L32C or 1769-L35CR
controller
• 1769-SDN scanner
or
• 1769-L32C or 1769-L35CR
controller
• one 1788-CN2DN
module
(2)
• 1756-CN2(R) module
• 1756-CNB(R) module
• 1756-DNB module
• 1788-CN(x) card
• 1788-DNBO card
or
• 1788-CN(x) card
• one 1788-CN2DN
module
(2)
EtherNet/IP NA • 1756-CN2(R) module
• 1756-CNB(R) module
• 1756-ENBT module
• 1788-CN(x) card
• 1788-ENBT card
EtherNet/IP ControlNet NA • 1756-ENBT module
• 1756-CN2(R) module
• 1756-CNB(R) module
• 1788-ENBT card
• 1788-CN(x) card
DeviceNet • 1769-L32E or 1769-L35E
controller
• 1769-SDN scanner
or
• 1769-L32E or 1769-L35E
controller
• one 1788-EN2DN
module
(3)
• 1756-ENBT module
• 1756-DNB module
• 1788-ENBT card
• 1788-DNBO card
or
• 1788-ENBT card
• one 1788-EN2DN
module
(3)
(1)
You can bridge from a ControlNet network to an Ethernet network and from an Ethernet network to a ControlNet via a SoftLogix virtual chassis. However, the products and
methods you must use to do so are more detailed than can be effectively described in this table. For more information on how to bridge from one network to another via a
SoftLogix virtual chassis, see the SoftLogix5800 System User Manual, publication number 1789-UM002.
(2)
Can serve as a dedicated standalone bridge from ControlNet to DeviceNet.
(3)
Can serve as a dedicated standalone bridge from EtherNet/IP to DeviceNet.