User manual

Publication CNET-UM001C-EN-P - November 2005
1-10 About the Logix5000 ControlNet Communication Modules
In this example, a workstation configures a drive on a DeviceNet network. The
workstation bridges from ControlNet to DeviceNet to reach the drive.
Figure 1.2 Configure a Drive on a DeviceNet Network
In this example, the bridge can be a ControlNet to DeviceNet bridging device,
for example a 1788-CN2DN or a Logix5000 system with a ControlNet
communication module and a DeviceNet communication module. This table
describes how to use Logix5000 systems in this example.
Table 1.2 Example Bridges and Related Components
PWR
STS
PORT
MOD
NET A
NET B
Bridge
ControlNet Network
PanelView Station
Workstation
DeviceNet Network
Drive
If The Bridge Is You Need These Components
CompactLogix system • a CompactLogix 1769-L32C, or
1769-L35CR controller
• a 1769-SDN scanner
ControlLogix system • a 1756-CN2 module
• a 1756-CNB module
• a 1756-DNB module
FlexLogix system • a FlexLogix controller
• a 1788-CNx card
• a 1788-DNBO card
SoftLogix system • a SoftLogix controller
• a 1784-PCIC(S) card
• a 1784-PCIDS card