User manual

1 Publication CNET-UM001C-EN-P - November 2005
Chapter 7
Communicate with PanelView and
RSView Products
Use This Chapter
This chapter describes how a controller uses a ControlNet communication
module to communicate with PanelView and RSView software products over a
ControlNet network.
Set Up the Hardware
In this example, the controller in the local chassis shares data with an HMI
application on the ControlNet network. This application could be running any
of the following:
• PanelView terminal
• PanelView Plus terminal
• workstation running an RSView 32 software
• workstation running an RSView Enterprise application, such as RSView
Machine Edition software or RSView Supervisory Edition software
Read this
chapter for:
• 1756-CN2, 1756-CN2R modules
• 1756-CNB, 1756-CNBR modules
• 1769-L32C, 1769-L35CR controllers
• 1784-PCIC, 1784-PCICS,
1784-PKTCS cards
• 1788-CNx cards
For This Information See Page
Determine Connections to PanelView Terminals 7-2
Add a PanelView Terminal 7-3
Organize Controller Data for a PanelView Terminal 7-6
Determine Connections to RSView Applications 7-7
Local Chassis
Logix5000 controller
with ControlNet
Communication Module
HMI Terminal
Data