User manual

Publication CNET-UM001C-EN-P - November 2005
6-18 Peer-to-Peer Messaging
4. Configure the MultiHop tab.
5. Select the ControlLogix backplane row.
6. Press Insert to add a hop.
7. Configure the new hop.
A.Click on the MultiHop tab.
B.Type the ControlNet node number of
the 1756-CN2 module that is on the
same ControlNet network as the
controller that sends the message.
C. Type the slot number of the 1756-CN2
module that is on the other network.
A.Select 1756-CN2 or 1756-CNB.
B.Type the ControlNet node number
of the controller that receives the
message.