User manual

Publication CNET-UM001C-EN-P - November 2005
6-8 Peer-to-Peer Messaging
2. On the Configuration tab, specify the type of MSG instruction:
The message instruction’s destination determines what specific
information is used on the Configuration tab.
Message Type to Configure a MSG to Logix5000 Controller
A.Choose a Message Type.
B.Depending on the Message Type,
you have additional parameters to
configure.
For more information on how to
configure the various Message
types, see the tables Message Type
to Configure a MSG to Logix5000
Controller, Message Type to
Configure a MSG to an SLC 500
Processor, and Message Type to
Configure a MSG to a PLC-5
Processor.
Table 6.4 Select a Message Type Table
To Select a See Table
Message Type to Configure a MSG to Logix5000
Controller
Message Type to Configure a
MSG to Logix5000 Controller
Message Type to Configure a MSG to an SLC 500
Processor
Message Type to Configure a
MSG to an SLC 500 Processor
Message Type to Configure a MSG to a PLC-5
Processor
Message Type to Configure a
MSG to a PLC-5 Processor
Table 6.5 Message Type to Configure a MSG to Logix5000 Controller
If You Want To For This Item Type or Select
Read (receive) the data Message Type CIP Data Table Read
Source Element first element of the tag that contains data in the other controller
Number of Elements number of elements to transfer
Destination Tag first element of the tag (controller-scoped) in this controller for the data